|
datasheetdetails
|
<< | < | AX-GS-CD-D80 - Duct Carbon Dioxide Sensor
|
| |
|
|
The AX-GS-CD-D80 Carbon Dioxide Duct mounted Transmitter uses NDIR single beam Infra-red technology to monitor CO2 concentration levels and output a corresponding 0-10V output. The unit is intended for use in return air ducts. |
Product Features
| • Duct mounting
• Monitors CO2 over range 0-2,000 ppm
• Optional 105 and 205mm probe lengths
| • Solid state sensing element
• Lifetime calibration interval
• Gas permeable PTFE filter
|
Power Supply D8041/2
| 18 to 30Vac 50/60Hz or 18 to 42Vdc
| Consumption D8041/2
| 0.65W @nominal voltage of 42Vdc (max 1.65W peak)
| Power Supply D8041M/2M
| 90 to 265Vac
| Consumption D8041M/2M
| 0.7W (max 1.7W peak)
| Ambient Temp. Range
| 0 to +50’C , 0-95% RH non condensing
| Duct Air Velocity
| 0 - 450m/min
| Housing
| Flame retardant ABS
| Dimensions Housing
| 77 x 77 x 40 mm
| Dimensions Probe 41
| 105 x 32 mm
| DimensionsProbe 42
| 205 x 32 mm
| Analogue Output
| 0-10V at 5mA max
| Sensor Type
| Non-dispersive Infra-red
| Range
| 0-2000ppm standard,
| Calibration Interval
| Lifetime
| Accuracy
| +/- 40ppm or 3% whichever is greater
| Stability
| Self Calibrating <2% FS over life of sensor (typical 10yrs)
| Linearity
| <1% FS @22 degC
| Settling Time
| <2 minutes after power up (10 minutes maximum accuracy)
| Conformity
| CE marked, EMC, LVD.
| Country of Origin
| UK and Mexico
|
| AX-GS-CD-D80.pdf / Duct carbon dioxide sensor. |  |
|
|
|
