Annicom Axio Logo  
    +44(0)1420487788  
 
home | about us | products | datasheets | account
 
   
datasheetdetails
 <<  |  <  |   AX-TE-Ix - Immersion temperature sensors 150mm
150mm probe
AX-TE-I3K / Immersion Temperature Sensor 150mm probe with 3K3A1 POA Qty
AX-TE-IT / Immersion Temperature Sensor 150mm probe with 10K3A1 POA Qty
AX-TE-IA / Immersion Temperature Sensor 150mm probe with 10K4A1 POA Qty
AX-TE-IH / Immersion Temperature Sensor 150mm probe with 20K6A1 POA Qty
AX-TE-ID / Immersion Temperature Sensor 150mm probe with 30K6A1 POA Qty
AX-TE-ISAT / Immersion Temperature Sensor 150mm probe with SAT1 POA Qty
AX-TE-I2.2K / Immersion Temperature Sensor 150mm probe with 2.2K POA Qty
AX-TE-I100 / Immersion Temperature Sensor 150mm probe with PT100a POA Qty
AX-TE-I1K / Immersion Temperature Sensor 150mm probe with PT1000a POA Qty
AX-TE-IN1K / Immersion Temperature Sensor 150mm probe with Ni1000a, TCR curve POA Qty
AX-TE-ITAC / Immersion Temperature Sensor 150mm probe with 1K87A1 POA Qty
AX-TE-ITX-W / Immersion Temperature Sensor 150mm probe with Active 4-20ma or 0-10V outputs - wide range POA Qty
Pocket
AX-TE-ISP / Stainless steel pocket for 150mm Probe POA Qty
 <<  |  <  | OVERVIEW | SPECIFICATION | DATASHEETS        

The AX-TE-Ix range of Immersion temperature sensors interface with a wide variety of HVAC control equipment. Units are available with a high quality thermistor element or with an active linear output. The sensors are designed to be fitted into a stainless steel pocket to provide accurate reading of fluid temperature without the need for the probe itself to be immersed.
Product Features
Large range of sensor options
Non-contact sensing
Direct fixing, no extra brackets required
Flame retardant ABS plastic

Output
Range of two wire thermistor and PTC platinum elements providing variable resistance.
Accuracy
Thermistor +/- 0.2C between 0C and 70C

Platinum +/- 0.35C between 0C and 100C (PT100a and PT1000a)
Materials
Housing - Flame retardant ABS plastic

Probe - Stainless Steel
Ambient Temperature
-10C to 60C, 0-95% RH
Terminals
Rising Clamp for 0.5-1.5mm Cable
Housing Dimensions
92mm diameter x 52mm height
Fixing Holes
2 off, 5mm holes on 92mm centres
Probe length
150mm standard, 65mm available
Protection
IP65
Country of Origin
Made in UK
AX-TE-ITX-W
see seperate data sheet

AX-TE-Ix.pdf / Immersion Temperature Sensors