|
datasheetdetails
|
<< | < | AX-GSE1-O2 - Oxygen Gas Detector - Space Mount (Analogue Output)
|
| |
|
|
The AX-GSE1-O2 is a high-performance Oxygen Gas Detector designed to provide accurate and reliable monitoring of Oxygen gas concentrations. Each unit is supplied pre-calibrated and ready for immediate installation. The device offers jumper-selectable 0–10V and 4–20mA analogue outputs for flexible integration with various control systems. The Electromechanical sensor provides a cost-effective solution for detecting Oxygen gas. It is factory-calibrated for Oxygen for 0-25% Volume detection and features jumper-selectable 0–10V and 4–20mA analogue outputs. |
Product Features
| • Wall/Space Mount Unit
• Non Display Version
• 24V DC powered model
| • Comes with PTFE dust filter
• 0-25% Volume Detection Range
• IP65 Version
|
Power Supply
| 24V DC
| Sensor Type
| Electromechanical
| Sampling Method
| Diffusion
| Detection Range
| 0-25% Volume
| Maximum Overload
| 30% Volume
| Response Time
| <10 s
| Coverage Area
| 75 SQM (5Meter Radius)
| Sensor protection
| Microporous PTFE Dust Filter
| Warm-up Time
| = 1 Min
| Output
| 4-20mA / 0-10V (User Selectable)
| Power Consumption
| < 1 W
| Sensor Lifetime
| > 3 Years In Fresh Air (Depending On Usage)
| Sensitivity Drift
| < 5% / Year (Depending On Usage)
| Enclosure Type & Rating
| ABS Plastic (Grey Colour), IP65
| Dimensions
| H82 × W94 × D35 mm
| Operating Temp
| -30 to 50°C
| Operating Humidity
| 0-95 %RH (Non-Condensing)
| Environmental Requirements
| Air Pressure
| Safety
| Explosion Safe Indoor Environment
| Exposure Safety
| Avoid Exposure to Corrosive Gases
| Standards
| EN 61000-6-3, EN 61326-1 (EMC Emissions)
| EN 61000-6-1, EN 61000-6-2 (EMC Immunity)
|
| COO
| EU
|
| AX-GSE1-O2.pdf / Oxygen Gas Detector (Analogue Output) |  |
|
|
|
