|
datasheetdetails
|
<< | < | AX-CNDR-RMD - Fan Coil Thermostat (BACnet) with Relay Module
|
| |
|
|
The AX-CNDR-RMD-xBN is a Remote Relay pack with integrated BACnet communication for use with the AXCNDR-D57BN thermostats. The module has interlocked 3-Speed fan, and Raise/Lower valve control. The AX-CNDR-D57BN Digital RoomControllers feature a high-contrast blue backlit display with white text, and fit a standard single gang patress. The unit has selection for an internal or external temperature sensors and provides an adjustable proportional and integral heating and cooling output. The clear display indicates room temperature, fan speed, occupancy and window status. The unit has a keycard/occupancy input with adjustable set back and exit delay and a window contact input. Network connectivity is provided with an isolated BACnet MSTP link, supporting COV. |
Product Features
| • PI temperature control
• Raise-lower valve relays
• 3 speed fan speed control with Auto mode
• Interlocked relays allow only one fan output on at a time
• Isolated BACnet MSTP / RTU, supports COV
• Adjustable setpoint range
| • Keycard / occupancy input, adjustable exit delay
• Window contact input
• Unused Keycard / Window contact inputs available as digital inputs
• Two part plug-in connectors for easy installation
• Built in terminating resistor
|
Product specifications
| AX-CNDR-RMD-xBN
| Supply
| 230Vac +/- 10% 50/60Hz
| Fuse
| 315mA, 230V
| Inputs
| External temperature sensor feed through
| Outputs
| Fan 12A at 250Vac resistive (Inductive typically 5A)
| Outputs
| Valves 6A at 250Vac resistive.
| Terminals
| Rising clamp for 0.5-1.5mm² cable
| Dimensions & weight
| 156 x 86 x 58mm, TBA
| Housing
| IP flame retardant ABS
| Ambient Temperature 0 to 50°C
|
| Country of Origin
| United Kingdom
|
|
| Product specifications
| AX-CNDR-D57BN
| Supply
| From AX-CNDR-RMD-xBN
| Inputs
| External temperature sensor, 10K3 Keycard and Window inputs for volt free contacts
| Outputs
| Connected to AX-CNDR-RMD-xBN
| Network
| BACnet MSTP
| Baud rates
| 9K2, 19K2, 38K4, 57K6, 76K8 and 115K2
| Terminals
| Rising clamp for 0.5-1.5mm² cable
| Dimensions & weight
| 86 x 86 x 35mm, 250g
| Housing
| Brushed Stainless steel to fit 35mm deep single back box
| Ambient Temperature
| 0 to 50°C
| Country of Origin
| United Kingdom
|
| AX-CNDR-RMD.pdf / Fan Coil Thermostat (BACnet) with Relay Module |  |
|
|
|
