|
datasheetdetails
|
<< | < | AX-CNDR-RMAF - Fan Speed Relay Module for CNDR.
|
| |
|
|
The AX-CNDR-RMAF-x are a range of relay modules dedicated for use as a remote fan speed switch with the AXCNDR range of Digital Room Controllers. The interlocked design of the three relays and common switching point ensurethat only one set of relay contacts is active at any time. The 24Vac version is available in an open or closed DIN rail carrier. The 230Vac version is only available in an enclosed DIN rail carrier, and provides a supply for the AX-CNDR and also 24Vac at 6VA output to power actuators etc. All units fit on to standard TS35 DIN rail |
Product Features
| • For direct connection to the AX-CNDR Digital Room Controllers
• Interlocked relays allow only one output on at a time
| • AX-CNDR-RMAF-ETx provides supply for CNDR and additional 24Vac output for actuator supply
• Switch up to 8 Amps resistive
|
Power Supply
| 24Vac (±15%)
| -ET6 and -ET10 only 230Vac (±10%)
|
| Fan speed input
| From AX-CNDR Digital Room Controller
| Fan Relay Contact Rating
| 8A resistive at 250Vac
| Output supply
| -ET6 only Supply for AX-CNDR and additional 24Vac (±15%) at 6VA max
| -ET10 only Supply for AX-CNDR and additional 24Vac (±15%) at 10VA max
|
| Fuses
| -ET6 and -ET10 only 230Vac input 250mA slow blow, 24Vac output 1A slow blow
| Terminals
| Rising clamp for 0.5-1.5mm² cable
| Weight & Dimensions
| AX-CNDR-RMAF 100 g, 68(W) x 82(H) x 49(D) mm
| AX-CNDR-RMAF-E 110 g, 52(W) x 86(H) x 58(D) mm
|
| AX-CNDR-RMAF-ET6 380 g, 105(W) x 86(H) x 58(D) mm
|
| Housing
| AX-CNDR-RMAF-E, ETx IP20 Lexan/Noryl flame retardant UL94-V0
| Ambient Temperature Range
| 0°C to 50°C
| Country of Origin
| United Kingdom
|
| AX-CNDR-RMAF.pdf / Dig Room Controller (Heating/Cooling,3SP Fan,24v/230v) |  |
|
|
|
